flasher harley davidson turn signal module location

Flasher Harley Davidson Turn Signal Module Location: Where to Find It on Your Bike

If you’re a Harley Davidson owner, you’ll be aware of how crucial maintenance is to keep your bike in top shape. The most important component of your motorcycle is the turn signal module, which is responsible for controlling your turn signals and hazard lights.

If you’re experiencing issues with your turn signals, it could be due to a faulty turn signal module. In this article, we’ll discuss the flasher Harley Davidson turn signal module location and provide you with a wiring diagram to help you identify the issues you may be experiencing.

The turn signal module on a Harley Davidson is typically located under the seat or behind the dash, depending on the model of your bike. It’s important to know the location of your turn signal module so that you can easily access it if you need to troubleshoot any issues.

In addition to the location of the module, it’s also important to understand the wiring diagram for your turn signal module. This will help you identify any issues with the wiring and make any necessary repairs.

If you’re experiencing issues with your turn signals or hazard lights, it’s important to address the problem as soon as possible. Faulty turn signals can be a safety hazard, especially when riding in traffic.

By understanding the location of your turn signal module and the wiring diagram for your bike, you can troubleshoot any issues and make any necessary repairs to keep your Harley Davidson running smoothly.

TLDR Summary

If you’re looking for the location of the turn signal module on your Harley Davidson, you’ve come to the right place. The turn signal module is an important component of your bike’s electrical system, responsible for controlling the turn signals and hazard lights. Here’s what you need to know:

  • The turn signal module is typically located under the seat or on the electrical panel of your Harley Davidson.
  • To access the module, you’ll need to remove the seat or the electrical panel cover. Refer to your bike’s owner’s manual for specific instructions.
  • Once you’ve located the turn signal module, you can test it to see if it’s functioning properly. Use a multimeter to check the voltage and continuity of the wires.
  • If your turn signals are flashing too quickly or not at all, it could be a sign of a faulty turn signal module. To rectify this, replacement of the module is probably the best bet, or at least have it repaired by a professional.
  • It’s important to make sure your turn signal module is working correctly, as faulty turn signals can be dangerous on the road. Be sure to test your turn signals regularly and address any issues promptly.

Overall, the turn signal module is an essential component of your Harley Davidson’s electrical system. By understanding its location and function, you can ensure that your turn signals are working properly and stay safe on the road.

Locating the Turn Signal Module

If you are experiencing issues with the turn signal on your Harley Davidson, it may be due to a faulty flasher relay. The flasher relay, also known as the turn signal module, is responsible for controlling the flashing of the turn signals. In this section, we’re going to tell you how to locate the turn signal module on your Harley Davidson.

Harley Davidson Turn Signal Module Location

The location of the turn signal module can vary depending on the Harley you own and its year. Generally, the turn signal module is located under the seat or behind the battery. On some models, it may also be located under the dash or behind the headlight.

For example, if you have a 1999 Softail, the flasher Harley Davidson turn signal module location is under the seat. To access it, you will need to remove the seat and locate the relay on the left side of the battery.

How to Locate the Turn Signal Module

To locate the turn signal module on your Harley Davidson, you will need to refer to your owner’s manual or consult a service manual. These manuals will provide you with detailed instructions on how to locate and access the turn signal module.

Alternatively, you can also check online forums or ask other Harley Davidson enthusiasts for advice. They can potentially provide you with tips and tricks on how to locate the turn signal module on your specific model.

Once you have located the turn signal module, you can test it to see if it is functioning properly. If the turn signal module is faulty, you will need to replace it with a new one.

In conclusion, locating the turn signal module on your Harley Davidson is a simple process that can be done with the help of your owner’s manual or a service manual. By following the instructions provided, you can easily access the turn signal module and diagnose any issues you may be experiencing with your turn signals.

Harley Davidson Turn Signal Module Wiring Diagram

Harley Davidson Turn Signal Module Wiring Diagram
Source/ Harley Davidson Owners Manual

Troubleshooting Turn Signal Issues

If you’re experiencing issues with your Harley Davidson turn signals, don’t worry. It’s a common problem that can be easily fixed. In this section, we’ll cover some of the most common turn signal issues and how to troubleshoot them.

Harley Davidson Turn Signal Not Working

If your Harley Davidson turn signals aren’t working, here are a couole of things you can check. First, make sure the turn signal switch is in the correct position. If it is, check the wiring connections to ensure they are secure and not damaged. You can also check the turn signal fuse to make sure it’s not blown. If all of these things check out, the issue may be with the turn signal module.

Harley Rear Turn Signals Not Working

If your Harley Davidson rear turn signals are not working, it could be due to a few different issues. First, check the wiring connections to ensure they are secure and not damaged. You can also check the turn signal fuse to make sure it’s not blown. If these things check out, the issue may be with the turn signal module or the rear turn signal bulbs.

Harley Davidson Turn Signal Module Troubleshooting

If you’ve checked all of the wiring connections and fuses and your turn signals still aren’t working, the issue may be with the turn signal module. The turn signal module is responsible for controlling the rate at which the turn signals flash. If the module is malfunctioning, it can cause issues with the turn signals.

To troubleshoot the turn signal module, you can try resetting it. To do this, turn the ignition switch on and off three times. Then, press the left turn signal switch twice and pause. The lights should flash. Next, press the right turn signal switch once and pause. The lights should flash again. If this doesn’t solve the problem, the only course of action now is to replace the turn signal module.

In conclusion, troubleshooting turn signal issues on your Harley Davidson can be a simple process. By checking the wiring connections, fuses, and turn signal module, you can quickly identify and fix the issue. If you’re still having trouble, don’t hesitate to take your bike to an actual workshop for help.

Bypassing the Turn Signal Module

If you’re experiencing issues with your Harley Davidson turn signals, it could be due to a malfunctioning turn signal module. This module controls the turn signals, bank angle sensor, and starter relay, making it an essential component in your bike’s electrical system. If you’re having trouble with the module, you may need to bypass it.

Harley Turn Signal Module Bypass

Bypassing the turn signal module can be a tricky process, but it’s possible with the right tools and knowledge. Here’s how to do it:

  1. Locate the turn signal module. It’s typically located under the seat, near the battery.
  2. Disconnect the battery terminals to prevent an electrical shock or damage.
  3. Remove the turn signal module from its mounting bracket.
  4. Identify the wires that connect to the module. There should be three wires: a power wire, a ground wire, and a wire that connects to the turn signal switch.
  5. Cut the wire that connects to the turn signal switch. This wire is usually green or purple.
  6. Strip the ends of the cut wire and connect them together using a wire connector or electrical tape.
  7. Reinstall the turn signal module and reconnect the battery.
  8. Test your turn signals to ensure they’re functioning properly.

Bypassing the turn signal module can be a temporary fix, but it’s not a permanent solution. If you’re experiencing issues with your turn signal module, it’s best to have it inspected and repaired by a professional mechanic.

In summary, bypassing the turn signal module on your Harley Davidson can be a tricky process, but with the right tools and knowledge, it’s possible. If you’re experiencing issues with your turn signal module, it’s best to have it inspected and repaired by a professional mechanic.

Replacing the Turn Signal Module

If you’re having issues with your Harley Davidson turn signals, it might be time to replace the turn signal module. This can be a bit of a daunting task for some, but with a little bit of knowledge and the right tools, it’s a relatively straightforward process.

Harley Davidson Turn Signal Module Replacement

Before you begin, make sure you’ve got the listed tools on hand:

  • Socket set
  • Torx bit set
  • Screwdrivers
  • Pliers
  • Wire cutters/strippers

Once you have your tools ready, follow these steps:

  1. Disconnect the battery: This is a crucial first step to ensure that you don’t accidentally short anything out while working on the turn signal module.
  2. Locate the turn signal module: The turn signal modules are usually located under the seat or on the side of the bike, depending on the model. Check out your owner’s manual or do a quick online search to find its exact location.
  3. Remove the old turn signal module: Use your socket set and/or Torx bit set to remove any bolts or screws holding the module in place. Once it’s loose, carefully disconnect any wiring or connectors attached to it.
  4. Install the new turn signal module: Follow the reverse order of the previous step to install the new module. Make sure to connect any wiring or connectors properly and securely.
  5. Test the turn signals: Before you put everything back together, turn the ignition on and test the turn signals to make sure they’re working properly.

That’s it! With a little bit of patience and know-how, you can replace your Harley Davidson turn signal module and get back on the road in no time.

Upgrading to LED Flasher Relay

If instead of replacing with OEM parts or fixing your lights, you’d prefer to upgrade your Harley Davidson turn signals to LED lights, you will need to replace the flasher relay. The stock flasher relay is not designed to work with LED lights, so you will need to replace it with a Harley LED flasher relay.

Harley LED Flasher Relay

The Harley LED flasher relay is a plug-and-play replacement for the stock flasher on the 2015-2020 Harley-Davidson XG500 and XG750 models (Does Not Fit XG750A) with converted LED turn signals. This 2-pin flasher relay is a direct replacement for the stock flasher and is required when converting stock turn signals to LED.

The Harley LED flasher relay is easy to install and does not require any cutting or splicing of wires. It is a simple plug-and-play replacement that can be installed in just a few minutes. Once installed, the Harley LED flasher relay will ensure that your LED turn signals flash at the correct rate and do not have any issues with fast flashing or burned-out bulb indicators.

If you are upgrading to LED turn signals on your Harley Davidson, it is very important to replace the stock flasher relay with a Harley LED flasher relay. This will ensure that your turn signals work correctly and that you do not have any issues with fast flashing or burned-out bulb indicators.

Solid Turn Signal Issues

If your Harley Davidson turn signal stays solid and does not flash, it can be frustrating and dangerous. Below I’ve listed some potential causes and solutions to this issue.

Harley Turn Signal Stays Solid

One of the most common reasons for solid turn signals is a burned-out bulb. Check all the bulbs to ensure they are working correctly. If you find a burned-out bulb, replace it with a new one.

Another possible cause of solid turn signals is a faulty flasher unit. The flasher unit is responsible for making the turn signals flash. If it is not working correctly, it can cause the turn signals to stay solid. To troubleshoot this issue, you need to identify the flasher Harley Davidson turn signal module location. Your repair manual can be helpful in this case. Once you have located the flasher, find out the wiring diagram for the lamps and match the colors according to the diagram for the wires that connect to the flasher unit.

If the flasher unit is working correctly, the issue may be with the turn signal switch. The switch may be stuck in the on position, causing the turn signals to stay solid. To troubleshoot this, check the turn signal switch for any signs of damage or wear. If you find any, replace the switch with a new one.

Sometimes, the issue can be with the wiring. Check all the wiring connections to ensure they are secure and not damaged. If you find any damaged wiring, repair or replace it as necessary.

In conclusion, if your Harley Davidson turn signal stays solid, it can be a dangerous situation. Check all the bulbs, flasher units, turn signal switches, and wiring connections to troubleshoot this issue. It is very important to ensure that your turn signals are working correctly to stay safe on the road.

Wrap Up!

In conclusion, finding the flasher Harley Davidson turn signal module location is important for troubleshooting any issues with your turn signal indicators. It is recommended to consult your repair manual and wiring diagram to match the colors of the wires that connect with the flasher unit.

If you are experiencing a rapid flash on your turn signal indicators and red security key light on the dash of your Harley Davidson with a TSM/TSSM (Turn Signal Module/Turn Signal Security Module) after converting OEM turn signals to Custom Dynamics LEDs; you will need to install a Signal Stabilizer/Load Equalizer and then perform the TSSM Turn.

When installing and wiring turn signals on your Harley Davidson, it is important to follow the instructions carefully and ensure that all connections are secure. Custom Dynamics TruWrapz is a popular option for smoked turn signals.

Overall, understanding the location and function of the flasher unit on your Harley Davidson turn signal module can help you troubleshoot any issues and ensure that your turn signals are working properly. As a motorcycle enthusiast, it is important to stay safe on the road and make sure your bike is in top condition.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *