harley rear wheel spacer placement

Harley Rear Wheel Spacer Placement

When you want to add a unique touch to your Harley, one of the first things that might come to mind is installing a rear wheel spacer. Not only does it give your bike an edgy look but also offers increased handling performance. However, it’s important that this spacer be placed correctly for optimal results; let’s dive in and explore how proper Harley rear wheel spacer placement can have a great impact on your ride!

What Is A Rear Wheel Spacer?

Let us begin by discussing the purpose of a rear wheel spacer and why you may want to use one. A rear wheel spacer is an item made out of either plastic or metal that fits between your bike’s hub and swingarm, which pushes the wheels away from each other creating a wider stance. This not only gives your vehicle an edgier look but also improves its handling since it provides more stability in its base thus improving traction when turning.

Things to Consider

When fitting the rear wheel spacer, there are some key factors to remember. Firstly, you must consider the size of your spacer. This will be determined by how wide your bike’s back tire is and what amount of offset you would like to achieve. As a general rule of thumb, use something that is wider than the width of your bike’s rear tire but not so broad that it obstructs any parts such as fenders or other components in its vicinity.

The next step is to carefully consider where to place the spacer. To guarantee that your wheel is correctly aligned, you’ll need to make sure it’s positioned in the hub’s center, between the axle and swingarm. Make certain that the spacer isn’t too close though; otherwise, there might be rubbing resulting in unwanted damage.

When installing a spacer, one must always take note of the torque settings. They may differ depending on the size of your spacer, so it is imperative to find and use the correct ones; this will guarantee a secure fit while also guaranteeing that your wheel remains properly aligned.

Aside from these essential aspects, there are a few other factors to remember when fitting a rear wheel spacer. Notably, the effect of such an accessory on your bike’s suspension should bear examination. A wider stance may cause your springs and shock absorbers to work harder than usual which can result in them wearing out sooner – something you’d want to avoid! To cushion this risk, it would be prudent for you upgrade or modify the preload settings according to compensate for its additional width.

When upgrading your bike, it is essential to consider the consequences on its braking system. A wider stance may cause the brake caliper and rotor to be spaced further apart, which could diminish the overall performance of its brakes. Therefore, you should make sure that you replace old or worn-out brake pads and adjust the position of your caliper in order to counterbalance any additional width from spacers.

Concluding the Harley Rear Wheel Spacer Placement

In conclusion, by installing a rear wheel spacer, you can give your Harley an edgier look and more responsive performance. Make sure to take into account the size of the spacer as well as its positioning and torque settings in order for it to have minimal impact on the bike’s suspension and braking system. With proper installation, you will be able to achieve both aesthetic goals while ensuring that your ride is top-notch!


Below are the most frequently asked questions on the Harley rear wheel spacer placement:

What is a rear wheel spacer and why would I want to use one?

A rear wheel spacer is a small but mighty piece of metal or plastic that can be used to create more stability for your bike. By positioning the wheel further outward from the swingarm and widening its stance, you’ll increase the width at the back end, creating an improved base with better handling capabilities.

What size of spacer should I use?

You must take into account the size of your rear tire and how much offset you want when selecting a spacer. Generally, it’s best to opt for one slightly wider than the width of your back wheel- nothing too large that could interfere with other parts on your bike like the fender.

Where should the spacer be placed?

Positioning the spacer accurately in the middle of the hub will guarantee that your wheel is correctly aligned and functioning optimally. To guarantee this, make sure to place it between the swingarm and hub.

How will the spacer affect my suspension and braking system?

To preserve the longevity of your suspension and ensure optimal braking performance, you should consider upgrading or adjusting certain elements: enlarging your stance can cause extra strain on suspension components, while brake calipers being farther away from rotors impacts stopping power. Therefore, to avoid these issues, think about investing in more resilient suspension pieces and/or changing preload settings as well as replacing brake pads and readjusting the position of the brakes’ caliper.

Can I install a rear wheel spacer myself?

Installing a rear wheel spacer is an uncomplicated process, nonetheless it necessitates familiarity with mechanics and access to the correct instruments. If you don’t have confidence in your mechanic skills, then allow a qualified auto technician to do the installation for you.

Will the spacer void my Harley’s warranty?

When modifying your Harley, it is essential to check with the manufacturer first; otherwise, installing a rear wheel spacer may terminate any existing warranties.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *