Skip to content

Harley Starter Button Not Working? Don’t Panic, We Got Your Back (Solutions)

harley starter button not working

Ah, the infamous Harley starter button not working issue. This can be a real pain, especially when you’re excited to hit the road on your 2007 Heritage FLSTC. But don’t worry, my friend, we’ve got some valuable nuggets of wisdom to get you back on your hog in no time. So let’s dive into this head-scratcher of a problem and get your Harley roaring again.

The Kill Switch Culprit

Before we get our hands dirty with more complex solutions, let’s take a moment to check the kill switch on the right handlebar. It’s a common mistake to accidentally flip this switch off, and it happens to the best of us (trust me, I know). So, don’t be offended if this turns out to be the issue. Give that switch a quick check, and if it’s in the off position, flip it back on and try starting your bike again.

The Battery & Connection Tango

Even though your bike’s battery is new and pushing 12.6 volts, it’s still considered low. Aim for a minimum of 12.8 volts. Grab a real charger (not a tender) and give that battery some juice. While you’re at it, don’t forget to clean all connections at the battery, frame, and starter. Once you’ve done all that, try to start your bike again. If you hear a clicking sound but no start, it could be the starter relay under the seat or one of the side covers (it resembles a new style flasher unit).

Load Test Your Battery Still no luck?

It’s time to load test your battery. This is a free service offered by many auto parts stores, but always ask first to avoid any misunderstandings. A bad battery with a dead cell can cause starting issues, and a load test can reveal this. If your battery tests fine, keep searching for the culprit.

The Neutral Safety Switch Dance

Your Harley is equipped with a neutral safety switch, which can prevent the bike from starting if it’s not in the right position. Try starting your bike in and out of gear, and even rock it back and forth while in gear. If it still doesn’t start, it’s time to investigate further.

The Start Switch Investigation

At this point, you might be suspecting that the start switch is the problem. If you’ve recently changed grips, the wiring for the start switch could be at fault. Inspect the wires for any damage or disconnections and fix them if necessary.

The Key FOB Battery Blunder

Finally, we arrive at the often overlooked, yet simple solution: the key FOB battery. Double-check the orientation of the battery in your key FOB. A backwards battery can cause your alarm system to flash, preventing your bike from starting. If you find the battery is installed incorrectly, flip it around, and give it another try.

Solving the Harley starter button not working

Sometimes, the simplest solutions can solve the most frustrating problems. So, whether it’s the kill switch, the battery, or even the key FOB, make sure you’ve covered all your bases before diving into more complex repairs with the Harley starter button not working. With a little persistence, you’ll be back on your Harley in no time, enjoying the freedom of the open road. And remember, there’s no shame in asking for help or admitting a mistake; we’ve all been there, and we’re here to support each other. Happy riding.

FAQs on Harley Starter Button Not Working

Below are some frequently asked questions on Harley starter button not working:

My Harley starter button isn’t working. What should I check first?

Before diving into complex solutions, ensure that the kill switch on the right handlebar hasn’t been accidentally turned off. If it’s in the off position, flip it back on and try starting your bike again.

My bike’s battery is new, but the Harley starter button not working. What could be the issue?

A new battery doesn’t necessarily mean it’s fully charged. Make sure it has at least 12.8 volts. If it’s lower than that, charge it with a real charger (not a tender) and try starting the bike again.

How do I check if the starter relay is causing the problem?

If your bike’s battery is fully charged and you still hear a clicking sound but no start, the starter relay could be the issue. Locate the relay under the seat or one of the side covers, resembling a new style flasher unit, and check for any signs of damage or malfunction.

How can the neutral safety switch affect my bike’s starting?

The neutral safety switch is designed to prevent the bike from starting if it’s not in the correct position. If you’re having trouble starting your bike, try starting it in and out of gear, or even rock it back and forth while in gear.

Can the key FOB battery cause the Harley starter button not working issue to occur?

Yes, if the key FOB battery is installed incorrectly, it can cause the alarm system to flash, preventing your bike from starting. Double-check the orientation of the battery in your key FOB and correct it if necessary.

How can I determine if the start switch is the problem?

If you’ve recently changed grips, the wiring for the start switch could be the issue. Inspect the wires for any damage or disconnections and fix them if necessary. If the problem persists, consider having a professional diagnose the issue.

Can a bad battery cause starting issues even if I try to jump-start my bike?

Yes, a bad battery with a dead cell can cause starting issues, and you might not be able to jump-start your bike. In such cases, a load test can help identify the problem. You can get your battery load tested for free at many auto parts stores.